V-One OS Bar

World championship tested OS triple-butted bar.

V-One OS Bar Flat 762
> Tripple butted, tapered 7075-T6 aluminium.
> 31.8mm clamp size.
> Available in 711mm (28") & 745mm (29.5")
> Bead blasted finish for strength.
> Polished grip area for better grip adhesion.
> Flat, Low rise (19mm), or High-rise (38mm)
> Laser etched graphics with custom cut marks.
> 5 & 9 degree sweep.

 

Codes & Sizing.
Clamp
Rise
Width
Black
Grey
31.8
19mm
745
320-05-019
320-08-019
31.8
19mm
711
320-05-020
320-08-020
31.8
38mm
711
320-05-038
320-08-038
31.8
38mm
745
320-05-039
320-08-039
31.8
FLAT
762
320-05-000
320-08-000

 
V1 OS Bar 762mm - Flat
V1 OS Bar 711mm - 19mm Rise
V1 OS Bar 711mm - 38mm Rise
V1 OS Bar 745mm - 19mm Rise
V1 OS Bar 745mm - 38mm Rise
 

 

V-One 762 OS Flat Bar

flatbars

“When is a flat bar not a flat bar? When it’s a Sunline flat bar. The reason being that rather than being completely flat, this bar stays level with the top of the bar clamp bulge and then tapers upwards at the bottom, which effectively results in about 5mm of rise. Sweep wise they have 11° of back sweep and no up-sweep, but in reality you can just rotate the bars to give a similar feel to regular riser bars. At 762mm wide they’re the widest bar in the Sunline range, and plenty wide enough for even the most ape like riders. Despite the width, the tripple butted construction means that they still weigh in at a reasonable 312g. So, if you’re after a pair of not quite flat bars in grey or black finish, then these are good ones to go for. ” [Dirt Mtb Issue 93, Pg 48]

LIMITED EDITION Bars Due Nov 5th

The Latest bars in the Limited Edition Series, Ti/Gold with Green Grips, are due to land with us at the beginning of November.
Stocks are seriously limited, so pre-order yours at you local stockist NOW.

Product Specs

  • Triple-butted, tapered 7075-T6 aluminum reduces weight by removing material from places it is not necessary
  • 31.8mm clamp size only
  • Bead blasted finish for strength
  • Polished grip area for better grip adhesion
  • Available in low 19mm (3/4”) rise
  • 745mm lengths provides leverage and slows steering at high speeds to add stability
  • Marks on end of bars to custom cut length
  • 5 x 9 degree sweep
  • Laser etched logos for durability
  • Bars and Grips are sold in sets. Must order both products.

MBR Review V-One Bar 9/10

SL_V1_FLATBAR_MBR_august09
blog comments powered by Disqus